Spektrum DX9 Manual de instrucciones descargar pdf (Pagina 34)

34 SPEKTRUM DX9 • TRANSMITTER INSTRUCTION MANUAL

Acro Gyro Function

The Gyro menu option enables you to create up to 7 gyro gain

pointsonamaximumof4curves.Gyrogaincurvesalsoprovide

exibilityinreducinggyrogainasthecontrolstickmovesfarther

away from the center.

To access the Gyro screen

1. In the System Setup List, highlight Aircraft Type.

2. In the Aircraft Type Screen, select NEXT at the bottom right

ofthescreen.ThiswillaccesstheAircraftOptionsscreen.

Activate the desired Gyro function(s). When the gyro function

is active, the Gyro function appears in the Function List.

To program a Gyro curve:

1. Access the Gyro 1, Gyro 2 or Gyro 3 menu option from the

Function list.

2. Assign either Aircraft or Heli to the Gyro Type.

3. Select a trim or a pot to use for a gyro gain trim if desired.

Optionsavailableinclude:R.Knob,LLever,RLever,LTrimA,

and R TrimA.

4. Scroll to Inh > Inh.

a. Select the ﬁrst Inh and assign the input channel for the

Gyro.Forexample,ifthegyroisinstalledtoassistonthe

ailerons, select Ail.

b. Select the second Inh and assign the output channel for the

Gyro,forexample,theGearchannel.

5.SelecttheCurveyouwishtoedit.

6. Add the desired gyro gain values to the points on the curve.

7. Assign the switch positions to activate the gyro curve. The

curveisactivewhentheboxissolid.

Pitch Curve Function

InAcromodeaPitchCurvescreenisavailablethatallowsa

variable pitch propeller to be used. Up to 4 programmable

curves are available that can be selected via a switch, knob or

stick position. Up to 7 points can be programmed at the desired

position on each curve. Note that the Pitch curve is driven by the

throttle stick position.

To access the Pitch Curve screen:

1. In the System Setup List, highlight Aircraft Type.

2. In the Aircraft Type Screen, select NEXT at the bottom right

ofthescreen.ThiswillaccesstheAircraftOptionsscreen.

ActivatethePitchCurvefunction.WhenthePitchCurve

functionisactivated,thePitchCurvefunctionappearsinthe

Function List.

3.AssignthepitchchannelintheChannelAssignmentfunction

afteractivatingthePitchCurveFunction.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 47 48

Comentarios a estos manuales

Sin comentarios

Spektrum DX9 Manual de instrucciones Pagina 34

Comentarios a estos manuales

Relacionado con productos y manuales para Controles remotos Spektrum DX9