Spektrum DX9 Manual de instrucciones descargar pdf (Pagina 10)

10 SPEKTRUM DX9 • TRANSMITTER INSTRUCTION MANUAL

BINDING

Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identiﬁer) code of a single speciﬁc

transmitter.Youwillneedtorebindafterthemodelprogrammingisinitiallysetuptofullyprogramthemodel’sfailsafepositions.

2. 3.

Binding Using the Receiver and Receiver Battery

Binding Using the Receiver and ESC

2. 3.

1. Lower throttle to the lowest position and make sure the

transmitter is powered off.

2. Insert the bind plug into the BIND/DATA port.

3.Insertthereceiverbatteryintoanyopenport.Thereceiver’s

LED will ﬂash when the receiver is ready to bind.

4. While pressing the Bind button, power on the transmitter.

5. Release the Bind button after the receiver has stopped ﬂash-

ingrapidly,oncethereceiver’sLEDstaysilluminated;this

indicates the receiver is bound to the transmitter. The screen

also provides binding information.

6. Remove the bind plug from the receiver.

1. Lower throttle to the lowest position and make sure the

transmitter is powered off.

2. Insert the bind plug into the BIND/DATA port.

3.InserttheESCplugintotheTHROport.

4.ConnectbatterytoESCandturnonESCswitch,ifavailable.

Thereceiver’sLEDwillrapidlyashwhenthereceiverisready

to bind.

5. While pressing the Bind button, power on the transmitter.

6. Release the Bind button after the receiver has stopped

ashingrapidly,oncethereceiver’sLEDstaysilluminated;this

indicates the receiver is bound to the transmitter. The screen

also provides binding information.

7. Remove the bind plug from the receiver.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 47 48

Sin comentarios

Spektrum DX9 Manual de instrucciones Pagina 10