Spektrum DX7 Manual de instrucciones descargar pdf (Pagina 10)

10 SPEKTRUM DX7 • TRANSMITTER INSTRUCTION MANUAL

BINDING

Binding is the process of programming the receiver to recognize the GUID (Globally Unique Identiﬁ er) code of a single speciﬁ c transmitter.

You must bind the AR8000 receiver to your transmitter before it will operate. The AR8000 requires the remote receiver to be connected to bind.

Binding Using the Receiver and Receiver Battery

Binding Using the Receiver and ESC

1. Lower throttle to the lowest position and make sure the

transmitter is powered off.

2. Insert the bind plug into the BIND/DATA port.

3. Insert the receiver battery into ANY open port. The receiver’s

LED will ﬂ ash when the receiver is ready to bind.

4. While pressing the Bind button, power on the transmitter.

5. Release the Bind button after the receiver has stopped

ﬂ ashing rapidly, once the receiver’s LED stays illuminated;

this indicates the receiver is bound to the transmitter. The

transmitter screen also provides binding information.

6. Remove the bind plug from the receiver.

1. Lower the throttle to the lowest position and make sure the

transmitter is powered off.

2. Insert the bind plug into the BIND/DATA port.

3. Insert the ESC plug into the THRO port.

4. Connect the battery to ESC and turn on the ESC switch,

if available. The receiver’s LED will ﬂ ash rapidly when the

receiver is ready to bind.

5. While pressing the Bind button, power on the transmitter.

6. Release the Bind button after the receiver’s LED stays illumi-

nated. This indicates the receiver is bound to the transmitter.

The transmitter screen also provides binding information.

7. Remove the bind plug from the receiver.

3 4

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 49 50

Sin comentarios

Spektrum DX7 Manual de instrucciones Pagina 10