Spektrum SPMR2200 DX2M Manual de usuario descargar pdf (Pagina 9)

Safety Points to Obey for Modelers

• Ensureyourbatteries(bothtransmitterandreceiver)havebeenproperly

charged for your model.

• Keeptrackofthetimethesystemisturnedonsoyouwillknowhowlong

you can safely operate your DX2M.

• Checkallservosandtheirconnectionspriortoeachrun.

• Donotoperateyourmodelnearspectators,parkingareasoranyotherarea

that could result in injury to people or damage of property.

• Donotoperateyourmodelduringadverseweatherconditions.Poor

visibility can cause disorientation and loss of control of your model.

• Donotpointthetransmitterantennadirectlytowardthemodel.

The radiation pattern from the tip of the antenna is inherently low.

• Donottakechances.Ifatanytimeduringtheoperationofyourmodelyou

observe any erratic or abnormal operation, immediately stop operation

of your model until the cause of the problem has been ascertained and

corrected. Safety can never be taken lightly.

Problem

Possible Cause Solution

•Thesystemwillnotconnect

•Yourtransmitterandreceiveraretooclosetogether.

They should be 1 to 4 feet apart.

•Youarearoundmetalobjects.

•Yourtransmitterwasaccidentallyputintobindmode

and is not bound to your receiver anymore.

•Movetransmitter1to4feetfromreceiver.

•Movetoanareawithlessmetal.

•Rebindyourtransmitterandreceiver.

•Thereceivergoesintofailsafemode

a short distance away from the

transmitter

•Checkthereceiverantennatobesureitisnotcutor

damaged.

•ReplaceSR3100antenna(SPM9005)orcontactHorizon

Product Support

•Makesureyourantennaisinanantennatubeandupin

the air as high as possible

•Receiverquitsrespondingduring

operation

•Inadequatebatteryvoltage

•Looseordamagedwiresorconnectionsbetween

battery and receiver

•Chargebatteries.Spektrumreceiversrequireatleast3.5V

to operate. An inadequate power supply can allow voltage

to momentarily drop below 3.5V and cause the receiver to

brown out and reconnect.

•Checkthewiresandconnectionbetweenbatteryand

receiver. Repair or replace wires and/or connectors

DX2M Troubleshooting Guide

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Comentarios a estos manuales

Sin comentarios

Spektrum SPMR2200 DX2M Manual de usuario Pagina 9

Comentarios a estos manuales

Relacionado con productos y manuales para Panel De Control Spektrum SPMR2200 DX2M